Below you will find the answers to some frequently asked questions. Just click on a question to view the answer. If you still have questions after viewing this page, please feel free to let us know.
The hot portable soft tub is made of a durable material that is used to make white water rafts. Hence, it is very durable!
Yes, the hot portable spa tub, Spa-N-A-Box, can be placed on any level surface. However, the total filled water weight is up to 2,350 lbs. or 8.33 lbs. per gallon. Spa2Go weighs in at about 2,124 lbs. when filled to capacity.
Yes, but in the winter the motor will have to run harder to heat. I recommend that you leave the cover on when not in use during cold weather. If the weather is extreme, I would recommend a shelter.
The setup time for the Spa2Go is 10 to 15 minutes and about 1/2hour to fill with water. Put cover on and it will heat up to 104 F(40C) in 24 hours. Spa-N-A-Box will take 20 to 30 minutes to setup plus the same fill time and heating time. The heater for your hot portable spa tub is a 1000-watt stainless steel unit.
Both Spa-N-A-Box and Spa2Go have barrier free sitting. Spa-N-A-Box has foam padding on the bottom and Spa2Go has an inflated bottom like an air mattress.
Filters can easily be removed for cleaning or replacing. This spa uses bromine based chemical system (not chlorine).
The hot portable spa has 127 micro air jets. Using a patented design, a ring of air jets is welded into the circumference of the spa. These jets are not adjustable. The 1.3 hp blower forces air through these jets creating a turbo-wave massage.
Copyright © 2007 Portable Hot Tubs Now, All Rights Reserved. Design Credits.